 | The Trident excels at pitch based tricks and
incorporates Roll Bars* and a Yoyo Cage** making it THE kite to perform
multi-wrap yoyos with the greatest of ease! |
 | Roll Bars* are fitted with a
'slip-catch'. If a
line tries to slip off of the Roll Bar after a 'pop' input, the slip-catch
will save the trick and keep you flying. |
 | The leading edge covers
socket and yoyo stopper cut outs to
eliminate line snags. |
 | A
'bullet-proof' trailing edge ensures that all those
pitch tricks don't take their toll on the material or leech line. |
 |
Leech line is adjustable. |
 | A spring loaded
brace on the back of the kite strengthens the lower spreader during strong gusts and
helps spring the
kite back into shape. |
 | Lower leading edge spar is standard length and easily
replaced. |
 |
Fittings on the lower spreader ends prevent snags and
cutting of the lower sockets. |
 | Drainage hole in the wing tip piece helps to empty the
leading edge spars during wet beach flying. |
 | Great freestyle trick flying. The Trident goes
from trick combination to trick combination with great fluidity. |
 | Very easy Dead-Launches reduce wear and tear. |
 | Non-snag, 3-piece
nose webbing with no hot sealing. |

Specifications:
Height : 80cm
Wingspan : 225cm
Weight :
Approximately 305g (20g
ballast installed).
Wind range : 3-18mph (sweet
spot =
6-10mph)
Sail : Icarex PC-31 Ripstop Polyester
/ clear Mylar monofilm.
Leading edges : Skyshark P200
(3 piece. Upper/Lower/Tip)
Lower spreaders : Skyshark 5PT.
Spine and upper spreader : Structil, 6mm
and 5mm respectively.
Fittings :
APA.
Bridle : Active.
Ballast weight :
Optional 10g or 20g Velcro
attached.
Trailing edge :
Double reinforced and contains a pipeline between the standoffs through which
the leech line can run freely with minimum wear.

UK Price:
£150
+Postage & Packing for default EYE graphic.
£160
+Postage & Packing for custom ALIEN graphic.
£170
+Postage & Packing for custom SKULL graphic.


Click for
Colours & Panel
Guide
In need of a replacement part?
See the Spare Parts
page
*Roll Bars designed by
Andy Wardley of
Benson Kites **Yoyo Cage
concept designed by Pim Kusters of
Dutchkites