• The Kite
  • Specs
  • Colours
  • Spares
  • TALON  
Kite Summary
Buy  £195


The Talon was developed to improve upon the Trident design, keeping all of the benefits
but with broader trick capabilities, a sharper feel, better old-school ability
and beautifully smooth trick transitions.

The kite has a superb feel in freestyle flying,
coupled with a stunning and extremely versatile sail graphic
that holds countless colour schemes, or colouring themes.
  • The Talon is a superb cutting-edge freestyle trick kite allowing you to express yourself with a huge range of tricks and combos.
  • Its excellent pitch performance carries over from the Trident and incorporates Roll Bars, making it yoyo and multi-wrap with ease.
  • Yoyo stoppers are equipped with a slip-catch. If a line tries to slip off of the Roll Bar after a trick input, the catch will prevent this.
  • The leading-edge material covers socket and yoyo stopper cut outs to eliminate line snags. All are internally reinforced.
  • The trailing-edge is heavily reinforced to ensure longevity throughout the kite's lifetime.
  • Additional Mylar reinforcing at the Centre-T joint.
  • Adjustable leech line.
  • Non-snag, 3-piece double layer nose construction.
  • Exposed stitching protected by tough 'Moonie Tape', preventing failure due to spine-rubbing.
  • Removable wing tips, and a 2-piece spine enable the kite to be packed down to less than 90cm.
  • Versatile sail graphic that looks fantastic and contains many themes and colouring preferances.
  • Great freestyle trick flying with few interruptions. The Talon flows smoothly through it's tricks & combos with a clean, fluid feel.
  • Good light wind and high wind performance for a Standard.

The Standard Talon should be your first choice, it is designed for the broadest wind range, tough and long lasting.

In light winds it will perform extremely well for a Standard.
In strong winds it will resist gusts, trick well, and remain competitive.

The best place to start with The Talon....but it gets better!

Kite Specifications

The Talon is built from some of the finest materials available to kite production today.
Specifically Icarex PC-31 sail fabric and Skyshark carbon spars.

Icarex is a tough, light-weight ripstop sail fabric available in many colours.
Skyshark carbon spars have an excellent price/performance ratio and are used in many kites.

 

Height 90cm
Wingspan 223cm
Weight Approximately 305g
Wing Range 5-25mph (8-40km/h)
Sail Icarex PC-31 Ripstop Polyester
Upper Leading Edge P200
Lower Leading Edge 5PT
   
Upper Spreader 5mm Excel
Lower Spreader 5PT
Spine P200 (2-piece)
Fittings APA / T-APA / HQ
Bridle Active
Weighting 5g Integrated into Spine Tip





Further details of measurements and construction illustrations can be found in the Tech pages
  • Colouring
  • Greys
  • Reds
  • Blues
  • Purples
  • Greens
  • Golden
  • Colourizer

Colouring The Kite

Each JoE kite is built to order, so the colours you choose are the first step.

There are many colour variations in the Talon, there's something in there for everyone!

To assist you we have provided a selection of examples, grouped by colour.
Use the buttons above to navigate through the various sample images.

If there is a look that you like, why not copy it into the Colourizer and personalise it further?
Or, design a completely new colour scheme!

Each sail panel has a unique reference name, as shown in the illustration above, these names are useful when communicating with JoE kites.

Likewise, each fabric colour has its own name. You can familiarise yourself with them below*

 

white light grey dark grey black yellow mango gold gold red rubin wine berry sky blue royal blue midnight blue teal slate rose purple grape magenta light green dark green flo. Yellow flo. green flo. orange

current colour WHITE - Foundation colour - Always available




*Some of the unusual colours may be out of stock or low on stock, please check with us before ordering.

On-screen colours will not be an exact representation of the fabric colour, particularly the flourescents.


Greys

A selection of colour schemes in no colour

1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16

Please use the Reference No. in the top-left when ordering

Click an image to send a copy to the Colourizer for personal tweaking


Reds

A selection of colour schemes in red

1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16

Please use the Reference No. in the top-left when ordering

Click an image to send a copy to the Colourizer for personal tweaking


Blues

A selection of colour schemes in blue

1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16

Please use the Reference No. in the top-left when ordering

Click an image to send a copy to the Colourizer for personal tweaking


Purples

A selection of colour schemes in purple

1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16

Please use the Reference No. in the top-left when ordering

Click an image to send a copy to the Colourizer for personal tweaking


Greens

A selection of colour schemes in green

1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16

Please use the Reference No. in the top-left when ordering

Click an image to send a copy to the Colourizer for personal tweaking


Golden

A selection of colour schemes in Orange & Yellow

1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16

Please use the Reference No. in the top-left when ordering

Click an image to send a copy to the Colourizer for personal tweaking


Design your own colour scheme Current Selection



Pick colours and paint the panels.

IMPORTANT NOTE: Check the 'Colouring' tab
for up-to-date fabric availability.


The best results use some grey-fade coupled with different shades of the same colour.


Clicking any of the example colour schemes
will send a copy to the above image for quick and easy reference.


To take a screen grab:

PC - Press {Alt-PrintScrn}
MAC - Open 'Grab' and use {Apple-Z}

Then paste into a paint program, save and e-mail.

If the Colourizer is not visible, please download the SVG plug-in from here
Spare Parts

Whether you've suffered a breakage, preparing for one or just renewing a bridle;
everything you'll need is here.

Ready Made spares are ready to drop in and come equipped with the necessary fittings*
Repair service is available depending on extent of damage.
Please note that damaged sail panels cannot be replaced.


Ready Made Raw Materials
Complete sail (no fittings) £150 7PT spar (82.5cm) £9
Spine (complete) £17 P2X spar (82.5cm) £6
Spine Upper £5.50 BD NITRO spar (82.5cm) £11
Spine Lower £7.50 Solid ferrule (10cm) £1.50
Spine Tail Piece (with weight) £4 P100 ferrule (for Nitro) £0.50
Upper Leading Edge spar £8.50 Spine tip nock £0.50
Lower Leading Edge spar £13 Yoyo stopper (unmodified) £1.50
Upper Spreader £5 Vinyl cap (specify size) £0.25
Lower Spreader (ferruled) £12.50 APA (standoff) 5mm £1
Lower Spreader (open) £11 APA-B (LLE) £1
Wing Tip Piece £5 APA-W (ULE) £1
Roll Bar £4 TW sail grabber £0.75
Yoyo Stopper (left) £4 JACO 2mm (Roll bar) £0.75
Yoyo Stopper (right) £4 T-Piece (6x7mm) £2
Standoff (inner) £3 O-ring £0.10
Standoff (outer) £3 Bridle line (per metre) £0.40
Bridle £8    
Bridle Mini-Leader £0.25    
Sail Tension Cord £0.40    


*Existing parts on your kite are excluded in the purchase unless requested.

e.g. Edge APA connectors when buying a LE spar.
or T-Piece & Tip Nock when buying a spine.